Hot runner temperature control box performance:
1, PID self-tuning function to ensure continuous temperature control accuracy, high-power double input double output;
2, the latest electronic circuit microcontroller to ensure the reliability and stability of temperature control;
3, the temperature accuracy is 0.5°C;
4, soft start preheating dehumidification function, automatically adjust the output power when starting, prevent instant start, extend the service life of the heater;
5, can switch J type thermocouple and K type thermocouple;
6, can switch automatic, manual and standby operation mode;
7, display the temperature, current and output power percentage of the production process;
8, easy to understand fault diagnosis signal, can display thermocouple circuit disconnection, thermocouple reverse connection, hot line disconnection, high and low temperature and alarm;
9. After the thermocouple is disconnected, you can choose to continue working manually to ensure the continuity of production;
10, the working voltage is 180-240V AC, 50/60Hz or 110V AC, 50/60Hz, the upper limit of the working current is 15A/30A;
11, when the temperature control card is suddenly inserted without power failure, the temperature controller will automatically delay the heating of the heater to prevent the temperature control card from burning out.
Most hot runner suppliers provide hot runner systems and temperature control boxes for injection molding customers. But in fact the temperature control box can be configured separately.
Touch screen Multi-point integrated Hot channel temperature control box
Hot runner temperature control box use precautions:
In order to properly operate and use the hot runner temperature control box and avoid damage or other losses caused by operation errors, please pay attention to the following points when using the hot runner temperature control box:
1, check whether the power supply is safe and controllable;
2. Check whether this manual matches the controller;
3, check whether the connector is safe and reliable;
4, check whether the heater is safe and reliable;
5, check whether the main power supply is turned off;
6, check whether the power supply is suitable for the controller;
7. Confirm that the grounding cable is connected to the controller;
8, open the main power switch;
9. Open the working switch of each controller;
10, set the control temperature, check whether the controller reaches the set temperature and is stable.